Regulatory Notices 1 CB : RF Exposure : This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
English 2 Federal Communications Commission Notice : This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Congratulations on your purchase of the GIGABYTE Docking Station. 1 Check Supplied Items AC Adapter Power Cord Manual Driver CD * The illustrations in this document may appear different from your model. 2 Using GIGABYTE Docking Station for the First Time 2 1 3 Connect the power cord to the AC adapter. Connect the AC Adapter to the DC-In Jack on the rear of the docking station. 3 Connect the power cord to the power outlet.
English 4 3 GIGABYTE Docking Station Tour Top View 3 4 5 1 2 1 Air Vent 2 Docking Port Connector: The docking port is used to interface between the notebook and the docking station. 3 Un-Docking Button: If the docked computer is on, press “Un-Docking” button to initiate the un-docking process. 4 Power Button 5 LED Indicator: The LED indicator lights on when the docking station is connected to AC power source and the docked Notebook is on.
5 Left View 1 Notebook Release Arm (Ejector Switch) The right side of the docking station has the Notebook Release Arm; this is pulled to undock the notebook from the docking station. 4 English Right View 2 34 1 HDMI Port 2 DVI Port 3 Audio Jack 4 Mic-In Jack Undocking GIGABYTE Notebook Follow the guide below to undock the notebook from the docking station: Please follow the instructions to learn how to remove the notebook.
6 English 1. I f the docked computer is on, you can initiate the undocking process by 1) Pressing the “Un-Docking” button on the Docking Station. 2) Clicking the “UnDocking” icon in the Docking Control Gadget. 2. Pull the Ejector Level out and back until the notebook unclips from the docking station. 3. L ift the notebook off of the docking station from the back of the notebook so as not to damage the docking connector.
