Owner's Manual
- 11 -
GH-PDU21-MF
English
Figure 1-1
Figure 2
Figure 3
Figure 4-1
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU.
Figure 2
Figure showing the correct installation of the cooler atop the
CPU.
Figure 3
Align the three insert spaces of the clip with the three juts on
the CPU socket and then push firmly downwards to hold the
clip in space.
If AM2, only need to hook up the middle of protuberant point.
Figure 4
Push the lever on the side of the cooler towards the lever
position on the base of the CPU to secure the cooler atop the
CPU. Repeat the steps in “Power Installation and 3.5”
Fan Speed Controller Installation (Figure 2-1~Figure 4-2)”.
The installation is now completed.
Installation Instructions for AMD AM2 (940) / K8 (939 / 754) Clip
Figure 1-2
Figure 4-2