User's Manual
Table Of Contents
- Safety_Precautions
- _bookmark1
- Introduction
- Unpacking
- _bookmark2
- Product_Overview
- _bookmark4
- Getting_Started
- Installing_the_Monitor_Base
- _bookmark5
- Adjusting_the_Viewing_Angle
- _bookmark6
- Installing_a_Wall-Mount_Bracket_(Optiona
- _bookmark7
- Using_the_Device
- Turning_the_Power_On/Off
- _bookmark9
- Selecting_the_Input_Source
- _bookmark11
- Operations
- Quick_Menu
- _bookmark12
- _bookmark14
- Configure_the_Device_Settings
- _bookmark15
- _bookmark17
- _bookmark19
- _bookmark20
- _bookmark21
- Appendices
- Specifications
- _bookmark23
- Supported_Timing_List
- _bookmark24
- Troubleshooting
- _bookmark25
- Basic_Care
- Notes_on_USB_Charging
- GIGABYTE_Service_Information
- _bookmark26
- SAFETY INFORMATION
- INTRODUCTION
- GETTING STARTED
- USING THE DEVICE
- OPERATIONS
- Quick Menu
- APPENDICES
LCD Monitor User's Manual
-
12
-
INTRODUCTION
Unpacking
1. Open the upper cover of the packaging box. Then observe the unpacking
instruction attached on the inner cover. Making sure the box is in the
correct orientation, carefully lay the box on the stable surfacepen.
2. Open the inner cover. Grab the EPS foam assembly (through the openings) to
pull it out of the box.