User`s manual

Hardware Installation - 8 -
Internal
Connectors
1 x CPU fan header 
1 x system fan header 
1 x front panel header 
1 x front panel audio header 
2 x USB 2.0/1.1 headers 
1 x serial port header 
1 x parallel port 
1 x clearing CMOS jumper 
Back Panel
Connectors
1 x PS/2 keyboard port 
1 x PS/2 mouse port 
1 x D-Sub port 
1 x DVI-D port 
4 x USB 2.0/1.1 ports  k
2 x USB 2.0/1.1 ports  j
2 x USB 3.0/2.0 ports  j
1 x RJ-45 port 
3 x audio jacks (Line In/Line Out/Microphone) 
I/O iTE IT8718 
Hardware
Monitor
System voltage detection 
CPU temperature detection 
CPU/System fan speed detection 
CPU overheating warning 
CPU/System fan fail warning 
CPU fan speed control 
* Whether the CPU fan speed control function is supported will depend on the CPU
cooler you install.
BIOS 2 x 8 Mbit ash 
Use of licensed AWARD BIOS 
Support for DualBIOS™ 
PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b 
Unique Features Support for @BIOS 
Support for Q-Flash 
Support for Xpress BIOS Rescue 
Support for Download Center 
Support for Xpress Install 
Support for Xpress Recovery2 
Support for EasyTune 
* Available functions in EasyTune may differ by motherboard model.
Support for Easy Energy Saver 
* Due to the hardware limitation, you must install the Intel
®
Core
TM
2 Extreme/
Core
TM
2 Quad/ Core
TM
2 Duo/Pentium Dual-Core/Celeron Dual-Core/
Celeron 400 Series CPU to enable support for Easy Energy Saver.
Support for Smart Recovery 
j
Only for GA-G41MT-USB3.
k
Only for GA-G41MT-D3V.