Owner's Manual

42
GA-6FASV Series Motherboard
SATA Configuration
Figure 2-5: SATA Configuration
Serial ATA
Enabled Enables on-board serial ATA function. (Default setting)
Disabled Disables on-board serial ATA function.
SATA Mode Selection
IDE Determine IDE as the SATA mode. (Default setting)
RAID Enable the SATA RAID function.
ACHI Set this item to enable SATA AHCI function for WinXP-SP1+IAA
driver supports AHCI mode.
SATA Port 0/1/2/3/4/5
The category identifies the types of Serial SATA hard disk from drive 0 to 5 that has been
installed in the computer. System will automatically detect HDD type.