User`s manual

- 71 - BIOS Setup
SLP_S4 Assertion Width
Select a minimum assertion width of the SLP_S4# signal.
Options available: 1-2 Seconds/2-3 Seconds/3-4 Seconds/4-5 Seconds.
Default setting is 4-5 Seconds.
Restore AC Power Loss
This option provides user to set the mode of operation if an AC / power loss occurs.
Power On: System power state when AC cord is re-plugged.
Power Off: Do not power on system when AC power is back.
Last State: Set system to the last sate when AC power is removed.
Options available: Power On/Power Off/Last State. Default setting is Last State.