User's Manual

BIOS Configuration
4-11
•
First / Second / Third Boot device
The default value is Floppy / HDD-0 / LS/ZIP.
Floppy Select your boot device priority by Floppy
LS/ZIP Select your boot device priority by LS/ZIP
HDD-0~3 Select your boot device priority by HDD-0~3
SCSI Select your boot device priority by SCSI
CDROM Select your boot device priority by CDROM
Disable Disable this function
LAN Select your boot device priority by LAN
•
Boot other device
The default value is Enabled
Enabled Enabled select your boot device priority function
Disabled Disabled this function
•
Swap Floppy Drive
The default value is Disabled.
Enabled Floppy A & B will be swapped under DOS.
Disabled Floppy A & B will be normal definition.
•
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80
tracks. 360 K type is 40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
The default value is Enabled.
Enabled BIOS searches for floppy disk drive to determine it is 40 or
80 tracks. Note that BIOS can not tell from 720 K, 1.2 M or
1.44 M drive type as they are all 80 tracks
Disabled BIOS will not search for the type of floppy disk drive by track
number. Note that there will not be any warning message if
the drive installed is 360 K