User's Manual

BIOS Configuration
4-21
•
POWER ON Function (Optional)
The default value is BUTTON ONLY.
Password Enter from 1 to 5 characters to set the Keyboard
Power On Password.
Hot KEY
Please set password with three different characters,
and press the three different characters password at
the same time.
Mouse Left Double click twice on PS/2 left bottom.
Mouse Right Double click twice on PS/2 right bottom.
BUTTON ONLY If your keyboard have “POWER Key” button, you can
press the key to power on your system.
Keyboard 98 Windows 98 keyboard “Power” key.
•
KB Power ON Password
The default value is Enabled.
Enter
Enter from 1 to 5 characters to set the Keyboard Power
On Password.
•
Onboard FDC Controller
The default value is Enabled.
Enabled Enable onboard FDC port.
Disabled Disable onboard FDC port.
•
Onboard Serial Port 1
The default value is Auto.
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.