User's Manual

6WMMC7 Series
4-22
•
UART Mode Select
(This item allows you to determine which Infra Red(IR) function of
Onboard I/O chip)
The default value is Normal
ASKIR Onboard I/O chip supports ASKIR.
IrDA Onboard I/O chip supports IrDA.
Normal Onboard I/O chip supports Normal.
•
RxD , TxD Active
The default value is Hi,Lo.
Hi, Hi RxD set Hi, TxD set Hi
Hi, Lo RxD set Hi, TxD set Lo
Lo, Hi RxD set Lo,TxD set Hi
Lo, Lo RxD set Lo,TxD set Lo
•
IR Transmittiion delay
The default value Enabled.
Enabled
Set IR Transmittiion delay Enabled
Disabled Set IR Transmittiion delay Disabled
•
Onboard Parallel port
The default value is 378/IRQ7.
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7.
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
Disabled Disable onboard LPT port.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
•
Parallel Port Mode
The default value is SPP.
SPP Using Parallel port as Standard Parallel Port.
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.