User's Manual

6WMMC7 Series
4-24
4.9. POWER MANAGEMENT SETUP
Figure 4.6: Power Management Setup
•
ACPI Suspend Type
The default value is S1 (PowerOn Suspend).
S1(PowerOn Suspend) Set ACPI Suspend type is S1.
S3(Suspend to RAM) Set ACPI Suspend type is S3.
CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software
Power Management Setup
ACPI Suspend Type
S1(PowerOnSu
spend)
Item Help
Power Management User Define
Video Off Method DPMS
Menu Level

Video Off In Suspend Yes
Suspend Type Stop Grant
MODEM Use IRQ 4
Suspend Mode Disabled
HDD Power Down Disabled
Soft-Off by PWR-BTTN Instant-off
Power LED in Suspend Blinking
AC BACK Function Memory
Wake-Up by PCI card Enabled
ModemRingOn/WakeOnLan Enabled
FAN Off In Suspend Enabled
USB KB / Mouse Wake from S3 Disabled
CPU Thermal-Throttling 50%
Resume by Alarm Disabled
* Date(of Month) Alarm 0
* Time(hh:mm:ss) Alarm 0 0 0
** Reload Global Timer Events **
Primary IDE 0 Disabled
Primary IDE 1 Disabled
Secondary IDE 0 Disabled
Secondary IDE 1 Disabled
FDC,COM,LPT Port Enabled
PCI PIRQ[A-D]# Enabled
↑↓→ ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults