Owner's Manual

GA-73PVM-S2H Motherboard - 5 2 -

2-9 MB Intelligent Tweaker(M.I.T.)

MB Intelligent Tweaker(M.I.T.)

 FSB & Memory Config [Press Enter]

Robust Graphics Booster [Auto]

CPU Clock Ratio

(µù)

[10X]

Normal CPU Vcore 1.32500V

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Item Help

Menu Level

Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory

and reduce the useful life of these components. This page is for advanced users only and we

recommend you not to alter the default settings to prevent system instability or other unex-

pected results. (Inadequately altering the settings may result in system's failure to boot. If this

occurs, clear the CMOS values and reset the board to default values.)

FSB & Memory Config

Item Help

Menu Level

Parameters Setting Current Value

Current CPU Freq, MHz 2000.0 2000.0

FSB-Memory Clock Mode [Auto]

x FSB-Memory Ratio Auto

x CPU Host Frequency (Mhz) Auto 200.0

Actual CPU Clock (Mhz) 200.0

x Memory Frequency (Mhz) Auto 533.3

Actual Memory Clock (Mhz) 533.3

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

(Note) This item appears only if you install a CPU that supports this feature.