User`s manual

- 43 - BIOS Setup
DRAM Conguration
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
DRAMConguration
CPU Host Clock Control [Auto]
x CPU Frequency(MHz) 200
Set Memory Clock [Auto]
x Memory Clock x6.66 1333Mhz
DCTs Mode [Unganged]
DDR3 Timing Items [Auto] SPD Auto
x CAS# latency Auto 9T 9T
x RAS to CAS R/W Delay Auto 9T 9T
x Row Precharge Time Auto 9T 9T
x Minimum RAS Active Time Auto 24T 24T
x 1T/2T Command Timing Auto -- --
x TwTr Command Delay Auto 5T 5T
x Trfc0 for DIMM1 Auto 110ns 110ns
x Trfc2 for DIMM2 Auto -- --
x Trfc1 for DIMM3 Auto -- --
x Trfc3 for DIMM4 Auto -- --
x Write Recovery Time Auto 10T 10T
x Precharge Time Auto 5T 5T
x Row Cycle Time Auto 33T 33T
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
DRAMConguration
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

x RAS to RAS Delay Auto 4T 4T
**
DCTs Drive Strength
**
DCT0 DCT1
ProcOdt(ohms) [Auto] 60 [Auto] 60
DQS Drive Strength [Auto] 1.0x [Auto] 1.0x
Data Drive Strength [Auto] 1.0x [Auto] 1.0x
MEMCLK Drive Strength [Auto] 1.25x [Auto] 1.25x
Addr/Cmd Drive Strength [Auto] 1.5x [Auto] 1.5x
CS/ODT Drive Strength [Auto] 1.5x [Auto] 1.5x
CKE Drive Strength [Auto] 1.5x [Auto] 1.5x
**
DCTs Addr/Cmd Timing
**
DCT0 DCT1
Addr/Cmd setup time [Auto] 1T [Auto] 1/2T
 Addr/Cmdnedelay [Auto] 22/64 [Auto] 0/64
CS/ODT setup time [Auto] 1/2T [Auto] 1/2T
 CS/ODTnedelay [Auto] 0/64 [Auto] 0/64
CKE setup time [Auto] 1/2T [Auto] 1/2T
 CKEnedelay  [Auto] 0/64 [Auto] 0/64
Bank Interleaving [Enabled]
Channel Interleave [Enabled]
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
DRAMConguration
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

DQS Training Control [Skip DQS]
CKE Power Down Mode [Disabled]
Memclock tri-stating [Disabled]