User`s manual

Appendix - 94 -
Figure 4
Figure 3
In Windows mode:
Steps:
1: Use an alternative system and insert the motherboard driver disk.
2: From your optical drive folder, double click the Menu.exe le in the BootDrv folder (Figure 3). A Command
Prompt window will open similar to that in Figure 4.
3: Insert the blank formatted disk. Select the controller driver by pressing the corresponding letter from the
menu and press <Enter>. For example, from the menu in Figure 4,
• For the ATi SB850, select 3) ATi AHCI/RAID Driver for XP for Windows XP operating system.
• For the GIGABYTE SATA2/JMicron JMB362, select 1) GIGABYTE GSATA driver for 32bit system for
Windows XP 32-bit operating system.
Your system will then automatically copy the driver les to the oppy disk. Press any key to exit when nished.