Datasheet

10
GA-8EGXRP Series Motherboard
Step 1-1: CPU Installation
Pin1 indicator
CPU Top View CPU Bottom View
1. Pull the lever out, than lift up the Lever.
2. Locate Pin 1 in the socket and look
for a (golden) cut edge on the CPU
upper corner. Then insert the CPU
into the socket.
3. Press down the CPU socket
lever and finish CPU installation.
M Please make sure the CPU type is supported by the motherboard.
M If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause
improper installation. Please change the insert orientation.
Pin1 indicator
Step 1: Install the Central Processing Unit (CPU)
Socket Actuation Lever