Computer Accessories User Manual

GA-8IDML Series Motherboard
38
UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Set onboard I/O chip UART to ASKIR Mode.
IrDA Set onboard I/O chip UART to IrDA Mode.
SCR Set onboard I/O chip UART to SCR Mode.
Normal Set onboard I/O chip UART to Normal Mode. (Default Value)
RxD, TxD Active
Hi, Hi Set RxD,TxD Active to Hi, Hi.
Hi, Lo Set RxD,TxD Active to Hi, Lo. (Default Value)
Lo, Hi Set RxD,TxD Active to Lo, Hi.
Lo, Lo Set RxD,TxD Active to Lo, Lo.
IR Transmission Delay
Enabled Enabled IR Transmission delay. (Default Value)
Disabled Enabled IR Transmission delay.
UR2 Duplex Mode
Half IR Function Duplex Half. (Default Value)
Full IR Function Duplex Full.
Onboard Serial Port 2
Auto BIOS will automatically setup the port 2 address.
3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8. (Default Value)
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.