Owner's Manual

GA-945PL-S3E Motherboard - 44 -
English
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto Set Robust Graphics Booster to Auto. (Default value)
Fast Set Robust Graphics Booster to Fast.
Turbo Set Robust Graphics Booster to Turbo.
O.C FSB1066 Core 2 CPU
Enable use of Core
TM
2 CPUs with 1066 MHz FSB through overclocking. To enable this feature,
you must install DDRII 533 memory module(s) and a Core
TM
2 CPU.
Disabled Disable the use of Core
TM
2 CPU (1066 MHz FSB). (Default value)
Enabled Enable the use of Core
TM
2 CPU (1066 MHz FSB).
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled Disable CPU Host Clock Control. (Default value)
Enabled Enable CPU Host Clock Control.
(Note) This item will show up when you install a processor which supports this function.
2-7 MB Intelligent Tweaker(M.I.T.)
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in
damages or shortened life expectancy to these components.
Please be aware that the M.I.T. menu items are for power users only.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Clock Ratio
(Note)
[18X]
Robust Graphics Booster [Auto]
O.C FSB1066 Core 2 CPU [Disabled]
CPU Host Clock Control [Disabled]
x CPU Host Frequency (Mhz) 200
x PCI Experss Frequency (Mhz) Auto
System Memory Multiplier [Auto]
Memory Frequency (Mhz) 533
DIMM OverVoltage Control [Normal]
PCI-E OverVoltage Control [Normal]
FSB OverVoltage Control [Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.3875V
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`