Manualshelf

Owner's Manual

ManualsBrandsGIGABYTE ManualsMotherboardsGIGABYTE GA-945PL-S3E (rev. 2.0)
61626364656667686970
Appendix- 61 -
English
STEP 3:
Connect a speaker or headphone to the rear Line
Out jack, a small window will pop up and ask
you what type of equipment is connected.
Choose Headphone or Line Out depending on
the device connected and click OK. The 2-chan-
nel audio setup is completed.
STEP 2:
In the Audio Control Panel, click the Audio I/O tab.
In the upper left list, click 2CH Speaker.
Setting Up 4-Channel Audio
STEP 1 :
After installation of the audio driver, you should find
an Audio Manager icon in your system tray
(you can also find the icon in Control Panel). Double-
click the icon to open the Audio Control Panel.