User`s manual

- 34 -
&
BootOverride
Allows you to select a device to boot immediately. Press <Enter> on the device you select and select
Yes to conrm. Your system will restart automatically and boot from that device.
&
SaveProles
This function allows you to save the current BIOS settings to a prole. You can create up to 8 proles
and save as Setup Prole 1~ Setup Prole 8. Press <Enter> to complete. Or you can select Select File
in HDD/USB/FDD to save the prole to your storage device.
&
LoadProles
If your system becomes unstable and you have loaded the BIOS default settings, you can use this func-
tion to load the BIOS settings from a prole created before, without the hassles of reconguring the BIOS
settings. First select the prole you wish to load and then press <Enter> to complete. You can select
Select File in HDD/USB/FDD to input the prole previously created from your storage device or load the
prole automatically created by the BIOS, such as reverting the BIOS settings to the last settings that
worked properly (last known good record).
Chapter 3 Appendix
"Xpress Install" will automatically scan your system and then list all of the drivers that are recommended to
install. You can click the Xpress Install button and "Xpress Install" will install all of the selected drivers. Or
click the arrow icon to individually install the drivers you need.
• Before installing the drivers, rst install the operating system. (The following instructions use
Windows 8 as the example operating system.)
• After installing the operating system, insert the motherboard driver disk into your optical drive.
Click on the message "Tap to choose what happens with this disc" on the top-right corner of the
screen and select "Run Run.exe." (Or go to My Computer, double-click the optical drive and
execute the Run.exe program.)
Drivers Installation