Owner's Manual

- 33 -
2-6 Peripherals
& SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode Selection
 AllowsyoutodecidewhethertoconguretheSATAcontrollerintegratedintheChipsettoAHCImode.
IDE   CongurestheSATAcontrollertoIDEmode.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& USB2.0 Controller
Enables or disables the integrated USB 2.0 controller. (Default: Enabled)
& Audio Controller
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Init Display First
 Species therstinitiation ofthemonitor displayfromtheinstalledPCIgraphicscardortheonboard
graphics.
Auto  LetsBIOSautomaticallycongurethissetting.(Default)
IGFX  Setstheonboardgraphicsastherstdisplay.
PCI  SetsthegraphicscardonthePCIslotastherstdisplay.
& Internal Graphics
Enables or disables the onboard graphics function. (Default: Auto)
& InternalGraphicsMemorySize
Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)