User`s manual

- 19 -

` PC Health Status

& ResetCaseOpenStatus

Disabled Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled Clears the record of previous chassis intrusion status and the CaseOpen eld will show

"No" at next boot.

& CaseOpen

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header. If the system chassis cover is removed, this eld will show "Yes", otherwise it will show "No". To

clear the chassis intrusion status record, set ResetCaseOpenStatus to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/DRAM Voltage/+3.3V/+5V/+12V

Displays the current system voltages.

& CPU/System Temperature

Displays current CPU/system temperature.

& CPU/System Fan Speed

Displays current CPU/system fan speeds.

& CPU Fan Speed Control

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal Allows the fan to run at different speeds according to the CPU temperature. You can adjust

the fan speed with EasyTune based on your system requirements. (Default)

Silent Allows the fan to run at slow speeds.

Manual Allows you to control the fan speed under the Fan Speed Percentage item.

Disabled Allows the fan to run at full speeds.

& Fan Speed Percentage

Allows you to control the fan speed. This item is congurable only when CPU Fan Speed Control is set

to Manual. Options are: 0.75 PWM value /

C ~ 2.50 PWM value /

& System Fan Speed Control