Owner's Manual

GA-EP45-DS4P/DS4 Motherboard - 10 -
1-2 Product Specifications
CPU  Support for an Intel
®
Core
TM
2 Extreme processor/
Intel
®
Core
TM
2 Quad processor/Intel
®
Core
TM
2 Duo processor/
Intel
®
Pentium
®
Dual-Core processor/Intel
®
Celeron
®
processor
in the LGA 775 package
(Go to GIGABYTE's website for the latest CPU support list.)
 L2 cache varies with CPU
Front Side Bus  1600/1333/1066/800 MHz FSB
Chipset  North Bridge: Intel
®
P45 Express Chipset
 South Bridge: Intel
®
ICH10R
Memory  4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory
(Note 1)
 Dual channel memory architecture
 Support for DDR2 1200/1066/800/667 MHz memory modules
(Go to GIGABYTE's website for the latest memory support list.)
Audio  Realtek ALC889A codec
 High Definition Audio
 2/4/5.1/7.1-channel
 Support for Dolby
®
Home Theater
(Note 2)
 Support for S/PDIF In/Out
 Support for CD In
LAN  2 x Realtek 8111C chips (10/100/1000 Mbit)
 Support for Teaming
Expansion Slots  1 x PCI Express x16 slot
(Note 3)
 1 x PCI Express x8 slot
(The PCIEX16_1 and PCIEX8_1 slots support ATI CrossFireX
TM
technology
and conform to PCI Express 2.0 standard.)
 1 x PCI Express x4 slot
(Note 4)
 3 x PCI Express x1 slots
 1 x PCI slot
Storage Interface  South Bridge:
- 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
 iTE IT8213 chip:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
 iTE IT8720 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394  T.I. TSB43AB23 chip
 Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket
connected to the internal IEEE 1394a header)