Owner's Manual

Appendix- 97 -
Figure 8
(Note) The item displayed in Figure 8 will be shown as Intel(R) ICH10R SATA AHCI Controller
when the SATA controllers are set to AHCI mode.
Step 3:
When a screen as shown in Figure 8 appears, select Intel(R) ICH8R/ICH9R/ICH10R SATA RAID
Controller
(Note)
and press Next.
Step 4:
After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system
and then press Next to continue the OS installation (Figure 9).
Figure 9