Owner's Manual
- 28 -
& AMD Memory Prole (A.M.P.)
(Note)
Allows the BIOS to read the SPD data on AMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Prole1 Uses Prole 1 settings.
Prole2
(Note)
Uses Prole 2 settings.
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Frequency (MHz)
This value is automatically adjusted according to the BCLK/PCIe Clock Control and System Memory
Multiplier settings.
(Note) This item is present only when you install a memory module that supports this feature.
` Advanced Memory Settings
& AMD Memory Prole (A.M.P.)
(Note)
, System Memory Multiplier, Memory Frequency(MHz)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& DRAM Timing Selectable
Quick and Expert allows the memory timing settings below to be congurable. Options are: Auto (default),
Quick, Expert.
& Prole DDR Voltage
When using a non-AMP memory module or AMD Memory Prole (A.M.P.) is set to Disabled, this item will
display as 1.50V. When AMD Memory Prole (A.M.P.) is set to Prole1 or Prole2, this item will display
the value based on the SPD data on the AMP memory.