User`s manual

- 51 - BIOS Setup

USB Controllers

Enables or disables the integrated USB controllers. (Default: Enabled)

Disabled will turn off all of the USB functionalities below.

USB Legacy Function

Allows USB keyboard to be used in MS-DOS. (Default: Enabled)

USB Storage Function

Determines whether to detect USB storage devices, including USB ash drives and USB hard drives

during the POST. (Default: Enabled)

Azalia Codec

Enables or disables the onboard audio function. (Default: Auto)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to

Disabled.

Onboard H/W 1394

Enables or disables the onboard IEEE 1394 function. (Default: Enabled)

Onboard H/W LAN

Enables or disables the onboard LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled.

Green LAN

When the onboard LAN function and Green LAN are enabled, the system will dynamically detect if a

LAN cable is connected or not. If not, the corresponding LAN controller will be disabled automatically.

(Default: Disabled)

SMART LAN

Start detecting at Port.....

Part1-2 Status = Open / Length = 0m

Part3-6 Status = Open / Length = 0m

Part4-5 Status = Open / Length = 0m

Part7-8 Status = Open / Length = 0m

higf

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Item Help

Menu Level



SMART LAN

This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN

cable. This feature will detect cabling issue and report the approximate distance to the fault or short. Refer to

the following information for diagnosing your LAN cable:

When No LAN Cable Is Attached...

If no LAN cable is attached to the motherboard, the Status elds of all four pairs of wires will show Open

and the Length elds show 0m, as shown in the gure above.