Owner's Manual

- 28 -
Reset Case Open Status &
Disabled Keeps or clears the record of previous chassis intrusion status. (Default) 
Enabled Clears the record of previous chassis intrusion status and the  Case Opened eld will show
"No" at next boot.
Case Opened &
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this eld will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
CPU Vcore/Dram Voltage/+5V/+12V/CPU VTT &
Displays the current system voltages.
CPU Temperature/System Temperature &
Displays current CPU/system temperature.
CPU Fan Speed/System Fan Speed &
Displays current CPU/system fan speeds.
CPU Warning Temperature &
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS will
emit warning sound. Options are: Disabled (default), 60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F, 90
o
C/194
o
F.
CPU/System Fan Fail Warning &
Allows the system to emit warning sound if the CPU fan or system fan are not connected or fail. Check the
fan condition or fan connection when this occurs. (Default: Disabled)
CPU Fan Speed Control &
Allows you to determine whether to enable the CPU fan speed control function and adjust the fan speed.
Normal Allows the CPU fan to run at different speeds according to the CPU temperature. You can 
adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the CPU fan to run at slow speeds. 
Manual Allows you to control the CPU fan speed under the  Slope PWM item.
Disabled Allows the CPU fan to run at full speeds. 
Slope PWM &
Allows you to control the CPU fan speed. This item is congurable only when CPU Fan Speed Control
is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
System Fan Speed Control &
Allows you to determine whether to enable the system fan speed control function and adjust the fan
speed.
Normal Allows the system fan to run at different speeds according to the system temperature. You 
can adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the system fan to run at slow speeds. 
Manual Allows you to control the system fan speed under the  Slope PWM item.
Disabled Allows the system fan to run at full speeds. 
Slope PWM &
Allows you to control the system fan speed. This item is congurable only when System Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.