Owner's Manual

- 35 -
Internal Graphics Deep Standby Mode &
Allows you to determine whether to let the onboard graphics enter deeper standby mode. (Default:
Disabled)
2-8 Save & Exit
Save & Exit Setup &
Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup
program. Select No or press <Esc> to return to the BIOS Setup Main Menu.
Exit Without Saving &
Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made
in BIOS Setup to the CMOS. Select No or press <Esc> to return to the BIOS Setup Main Menu.
Load Optimized Defaults &
Press <Enter> on this item and select Yes to load the optimal BIOS default settings. The BIOS default
settings help the system to operate in optimum state. Always load the optimized defaults after updating
the BIOS or after clearing the CMOS values.
Boot Override &
Allows you to select a device to boot immediately. Press <Enter> on the device you select and select Yes
to conrm. Your system will restart automatically and boot from that device.
SaveProles &
This function allows you to save the current BIOS settings to a prole. You can create up to 4 proles and
save as Setup Prole 1~ Setup Prole 4.
LoadProles &
If your system becomes unstable and you have loaded the BIOS default settings, you can use this function
to load the BIOS settings from a prole created before, without the hassles of reconguring the BIOS
settings. First select the prole you wish to load and then press <Enter> to complete.