Quick Start Manual

SATA Configurations (Nvidia nForce430) - 10 -
Ác
Åé
¤¤
¤å
Figure 14
Step 5:
Insert an empty floppy disk and select the nVIDIA Serial ATA driver by pressing the corresponding letter
from the menu (for example, from the menu in Figure 14, press I to select nVIDIA C51 Series Raid (XP)
if you wish to install Windows XP or press J to select nVIDIA C51 Series Raid (2K) if you wish to install
Windows 2000). Then it will take about one minute to copy the SATA driver from the motherboard driver
CD to the floppy disk.
Step 6:
Press 0 to exit when the procedure is complete.
Step 4:
Double-click MENU.exe. An MS-DOS prompt screen similar to Figure 14 below will appear
(Note)
.
(Note): The name of the drivers in the menu might differ, depending on the version of your
driver CD-ROM disk.