User's Manual

BIOS Setup
English
- 41 -
Password Check
System The system can not boot and can not access to Setup page will be denied if the
correct password is not entered at the prompt.
Setup The system will boot, but access to Setup will be denied if the correct password
is not entered at the prompt. (Default value)
Flexible AGP 8X
Auto Automatically set AGP transfer rate according to AGP compatibility and stability.
(Default value)
8X Always set AGP transfer rate to 8X mode if the 8X mode supported by the AGP card.
4X Set AGP transfer rate to 4X mode no matter what the AGP transfer rate the card is.
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install an AGP card and a PCI VGA card on the motherboard.
AGP Set Init display first to AGP. (Default value)
PCI slot Set Init display first to PCI.