Quick Start Manual

SATA Hard Drive Configurations (Sil3114) - 10 -

Ác

Åé

¤¤

¤å

Advanced BIOS Features

KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F3: Language F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Hard Disk Boot Priority

K L

(4) Configuring hard drive boot priority in BIOS Setup

After configuring RAID set or hard drive, if you wish to install operating system to the drive, go back to

the system BIOS setup to set the hard drive boot priority.

Step 1:

Turn on your computer and press Del to enter BIOS Setup during POST (Power-On Self Test). In BIOS

Setup menu, select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard

Disk Boot Priority submenu, move the SATA hard drive/RAID set onto which you want to install Windows

operating system to the first priority by using UP or DOWN ARROW key (Figure 13).

Step 3:

Save and exit BIOS Setup.

Step 2:

Set First Boot Device under the Advanced BIOS Features menu to CD-ROM (Figure 14). This allows

the system to boot from the Windows setup disk after system restarts

Figure 13

Figure 14