Quick Start Manual

SATA Hard Drive Configurations (Sil3114) - 14 -
Ác
Åé
¤¤
¤å
Figure 22
Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 22 below
will appear. Use the ARROW keys to select Silicon Image SiI 3114 SoftRAID 5 Controller for
Windows XP/Server 2003 (or the other, depending on the operating system you wish to install) and press
ENTER. Then it will begin to load the SATA driver from the floppy disk.
If a message appears saying one or some file(s) cannot be found, please check the floppy disk
or copy the correct SATA driver again from the motherboard driver CD.
Figure 23
Step 4:
When the screen as shown below appears, press ENTER to continue the SATA driver installation from
the floppy disk.