Manualshelf

Quick Start Manual

ManualsBrandsGIGABYTE ManualsMotherboardsGIGABYTE GA-K8NXP-SLI (rev. 1.0)
6789101112131415
SATA Hard Drive Configurations (Sil3114)- 15 -
Figure 24
After the SATA controller driver installation is completed, you should see a screen as shown below. It
indicates that you have installed the SATA controller driver successfully. You can proceed with the
Windows 2000/XP installation.
(Note: Each time you add a new hard drive to a RAID array, the RAID driver will have to be installed
under Windows once for that hard drive. After that, the driver will not have to be installed.)