Quick Start Manual

SATA Hard Drive Configurations (Sil3114)- 7 -

Figure 9

Figure 8

3-2 Configuring RAID set

Step 1:

Select Create RAID set and press ENTER, and the RAID type selection menu will appear (Figure 8).

Use the UP or DOWN ARROW key to select a RAID type that you wish to create and press ENTER.

The options include RAID 0, RAID 1, RAID 5, RAID10, SPARE DRIVE, and JBOD. The following is an

example of RAID 0 configuration.

Step 2:

After the selection of RAID 0 , select Auto configuration or Manual configuration (Figure 9). If Auto

configuration is selected, BIOS will automatically assign RAID member drives and set the chunk size

of Striped Sets to 64KB. If Manual configuration is selected, you can manually change the chunk size

(from 4K to 128K) and then assign the drives to be used in the RAID array.