Manualshelf

Quick Start Manual

ManualsBrandsGIGABYTE ManualsMotherboardsGIGABYTE GA-K8NXP-SLI (rev. 1.0)
12345678910
SATA Hard Drive Configurations (Sil3114) - 8 -
Ác
Åé
¤¤
¤å
Step 3:
After assigning the hard drives, select the size for the RAID set. BIOS will set a default size for it and you
can use the UP or DOWN ARROW key to change the size (Figure 10).
K:
L:
KL
KL
Step 5:
After finishing all the settings of a RAID set and press ENTER, you should see the prompt
"Are You Sure?" Press Y to confirm or N to cancel. After the configuration is completed, the RAID Set
will appear in the logical drive list (Figure 11).
Figure 11
Figure 10