Manualshelf

Quick Start Manual

ManualsBrandsGIGABYTE ManualsMotherboardsGIGABYTE GA-K8NXP-SLI (rev. 1.0)
12345678910
SATA Hard Drive Configurations (Sil3114)- 9 -
Figure 12
KL
If you want to remove one or more RAID sets, spare drives, and JBODs, select the Delete RAID set
item (Figure 12) in Main Menu. Press ENTER and follow the on-screen instructions to delete the RAID
set.
After completing the configuration, press CTRL+E to exit the RAID Configuration Utility.
Now, you can proceed to the installation of the SATA driver and operating system.
3-3 Deleting RAID groups, spare drives, or JBOD