Technology Computer Hardware User Manual

- 38 -GA-K8VM800M Motherboard
English
Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984 -2004 Aw ard Software
Stan dard CMOS Features
Date (mm:dd:yy) Tue, Jan 2 7 2004
Time (hh:mm :ss) 22:31:24
} IDE P rimary Master [None]
} IDE P rimary Slave [None]
} IDE Secondary Master [None]
} IDE Secondary Slave [None]
Drive A [1.44M, 3.5"]
Drive B [None]
Floppy 3 Mode Suport [Disabled]
Holt On [All, But Keyboard]
Base Memory 640K
Extended Memory 127M
Total Memory 128M
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: P revious Values F6: Fail-Save Default F7: Optimized Defaults
Item Help
Menu Level}
Change the day, month,
year
<We ek>
Sun. to Sat.
<Month>
Jan. t o Dec.
<Day>
1 to 31 (or maximum
allowed in the m onth)
<Ye ar>
1999 to 2098
Date
The date format is <week>, <month>, <day>, <y ear>.
Week The week, from Sun to Sat, determined by the BIOS and is displayed only
Month The month, Jan. Through Dec.
Day The day, from 1 to 31 (or the maximum allowed in the month)
Year The year, from 1999 through 2098
Time
The times format in <hour> <minu te> <second>. The time is calculated base on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.
IDE Primary Master, Slave / IDE Secondary Master, Slave
The category identifies the types of hard d isk from driv e C to F that has been installed in the
computer. There are tw o types: auto type, and manual type. Manual type is user-definable; Auto type
which will automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if y ou enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in the
documentation form your hard disk vendor or the system manufacturer.
Cylinder Number of cylinders
Head Number of heads
Precomp Write precomp
Landing Zone Landing zone
Sector Number of sectors
If a hard disk has not been installed, select NONE and press <Enter>.