Technology Computer Hardware User Manual

BIOS Setup
English
- 45 -
Modem Ring On
An incoming call via modem can awake the system from any suspend s tate.
Disabled Disable Modem Ring on function.
Enabled Enable Modem Ring on function. (Default v alue)
Resume by Alarm
You can set "Resume by Alarm" item at "Enabled" and key in data/time to power on sy stem.
Disabled Disable this function. (Default v alue)
Enabled Enable alarm function to POWER ON sy stem.
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm : Everyday, 1~31
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
CMOS Setup Utility-Copyright (C) 1984 -2004 Aw ard Software
PnP/PCI Configurations
PCI 1 IRQ Assignment [Auto]
PCI 2 IRQ Assignment [Auto]
PCI 3 IRQ Assignment [Auto]
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: P revious Values F6: Fail-Save Default F7: Optimized Defaults
Item Help
Menu Level}
Device(s) using this
INT:
Network Cntrlr
- Bus 1 Dev18 Func 0
Display Cntrlr
- Bus 1 Dev 0 Func 0
IEEE 1394 Host Cntrlr
- Bus 0 Dev20 Func 0
USB 1.1 Host Cntrlr
- Bus 0 Dev16 Func 1
USB 1.1 Host Cntrlr
- Bus 0 Dev16 Func 0
PnP/PCI Configurations
PCI 1 IRQ Assignment
Auto Auto assign IRQ to PCI 1. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1.
PCI 2 IRQ Assignment
Auto Auto assign IRQ to PCI 2. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.
PCI 3 IRQ Assignment
Auto Auto assign IRQ to PCI 3. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.