Owner's Manual

GA-M61PME-S2P Motherboard - 60 -

Step 6:

Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The

procedure is complete after the system restarts.

Press <Y> to load BIOS defaults

Step 4:

Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should

see the new BIOS version is present on the POST screen.

Step 5:

During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults and press

<Enter> to load BIOS defaults. System will re-detect all peripherals devices after a BIOS update, so we

recommend that you reload BIOS defaults.

Esc: Quit : Select Item

F8: Q-Flash F10: Save & Exit Setup

Load Optimized Defaults

 Standard CMOS Features

 Advanced BIOS Features

 Integrated Peripherals

 Power Management Setup

 PnP/PCI Configurations

 PC Health Status

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

Load Optimized Defaults (Y/N)? Y