User`s manual

- 11 - Hardware Installation
Storage Interface

iTE IT8720 chip:
- 1 x oppy disk drive connector supporting up to 1 oppy disk drive
USB

Integrated in the Chipset

Up to 14 USB 2.0/1.1 ports (10 on the back panel, including 2 eSATA/USB
Combo, 4 via the USB brackets connected to the internal USB headers)
IEEE 1394

T.I. TSB43AB23 chip

Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket
connected to the internal IEEE 1394a header)
Internal

1 x 24-pin ATX main power connector
Connectors

1 x 8-pin ATX 12V power connector

1 x oppy disk drive connector

1 x IDE connector

10 x SATA 3Gb/s connectors

1 x CPU fan header

3 x system fan headers

1 x power fan header

1 x Chipset fan header

1 x front panel header

1 x front panel audio header

1 x CD In connector

1 x S/PDIF In header

1 x S/PDIF Out header

2 x USB 2.0/1.1 headers

1 x IEEE 1394a header

1 x serial port header

1 x clearing CMOS button

1 x power button

1 x reset button
Back Panel

1 x PS/2 keyboard/mouse port
Connectors

1 x coaxial S/PDIF Out connector

1 x optical S/PDIF Out connector

2 x IEEE 1394a ports

8 x USB 2.0/1.1 ports

2 x eSATA/USB Combo connectors

2 x RJ-45 ports

6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/
Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller

iTE IT8720 chip