User`s manual

- 29 - Hardware Installation

9) SATA2_0/1/2/3/4/5 (SATA 3Gb/s Connectors, Controlled by P55 Chipset, Blue)

The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s

standard. Each SATA connector supports a single SATA device. The P55 Chipset supports RAID 0,

RAID 1, RAID 5 and RAID 10. Refer to Chapter 5, "Conguring SATA Hard Drive(s)," for instructions on

conguring a RAID array.

Pin No. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

SATA2_0SATA2_2SATA2_4

SATA2_1SATA2_3SATA2_5

10) GSATA2_0/1 (SATA 3Gb/s Connectors, Controlled by JMB362, White)

The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard.

Each SATA connector supports a single SATA device. The JMB362 supports RAID 0 and RAID 1. Refer

to Chapter 5, "Conguring SATA Hard Drive(s)," for instructions on conguring a RAID array.

Pin No. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

• A RAID 0 or RAID 1 conguration requires at least two hard drives. If more than two hard

drives are to be used, the total number of hard drives must be an even number.

• A RAID 5 conguration requires at least three hard drives. (The total number of hard drives

does not have to be an even number.)

• A RAID 10 conguration requires at least four hard drives and the total number of hard drives

must be an even number.

Please connect the L-shaped end of

the SATA 3Gb/s cable to your SATA

hard drive.

7 1

GSATA2_0

GSATA2_1