User`s manual
- 55 - BIOS Setup
2-6 Integrated Peripherals
SATA RAID/AHCI Mode (Intel P55 Chipset)
Enables or disables RAID for the SATA controllers integrated in the Intel P55 Chipset or congures the
SATA controllers to AHCI mode.
Disabled Disables RAID for the SATA controllers and congures the SATA controllers to IDE
mode. (Default)
RAID Enables RAID for the SATA controllers.
AHCI Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specication that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
SATA RAID/AHCI Mode [Disabled]
SATA Port0-3 Native Mode [Enabled]
USB Controllers [Enabled]
USB Legacy Function [Enabled]
USB Storage Function [Enabled]
Azalia Codec [Auto]
PCI Express x4/x1 Slot [Auto]
Onboard H/W 1394 [Enabled]
Onboard H/W LAN1 [Enabled]
Onboard H/W LAN2 [Enabled]
Green LAN [Disabled]
SMART LAN1 [Press Enter]
SMART LAN2 [Press Enter]
Onboard LAN1 Boot ROM [Disabled]
Onboard LAN2 Boot ROM [Disabled
eSATA Controller [Enabled]
eSATA Ctrl Mode [IDE]
GSATA 0_1 Controller [Enabled]
GSATA 0_1 Ctrl Mode [IDE]
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
GSATA 2_3/IDE Controller [Enabled]
GSATA 2_3/IDE Ctrl Mode [IDE]
Onboard Serial Port 1 [3F8/IRQ4]