User`s manual

- 91 - Appendix
B. Installing Windows Vista
(The procedure below assumes that only one RAID array exists in your system.)
For the Intel P55:
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps.
When a screen similar to that below appears, select Load Driver (Figure 4).
Step 2:
Insertthemotherboarddriverdisk(MethodA)ortheoppydisk/USBashdrivethatcontainsthedriver(Method
B), then specify the location of the driver (Figure 5). Note: For users using a SATA optical drive, be sure to
copythedriverlesfromthemotherboarddriverdisktoaUSBashdrivebeforeinstallingWindowsVista(go
to the BootDrv folder and save the whole iMSMfoldertotheUSBashdrive).ThenuseMethodBtoload
the driver.
Method A:
Insert the motherboard driver disk into your system and browse to the following directory:
\BootDrv\iMSM\32Bit
For Windows Vista 64-bit, browse to the 64Bit folder.
Method B:
InserttheUSBashdrivecontainingthedriverlesandbrowseto\iMSM\32Bit (for Windows Vista 32-bit) or
\iMSM\64Bit (for Windows Vista 64-bit).
Figure 4
Figure 5