Owner's Manual

Appendix - 80 -

B. Conguring SATA controller mode in BIOS Setup

Make sure to congure the SATA controller mode correctly in system BIOS Setup.

Step 1:

Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test).

To create RAID, set SATA RAID/AHCI Mode under the Integrated Peripherals menu to RAID (Figure 1)

(Disabled by default). If you do not want to create RAID, set this item to Disabled or AHCI.

Step 2:

Save changes and exit BIOS Setup.

Figure 1

The BIOS Setup menus described in this section may differ from the exact settings for your moth-

erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you

have and the BIOS version.

Integrated Peripherals

SATA RAID/AHCI Mode [RAID]

SATA Port0-3 Native Mode [Enabled]

USB Controllers [Enabled]

USB Legacy Function [Enabled]

USB Storage Function [Enabled]

Azalia Codec [Auto]

Onboard H/W 1394 [Enabled]

Onboard H/W LAN [Enabled]

Green LAN [Disabled]



SMART LAN [Press Enter]

Onboard LAN Boot ROM [Disabled]

Onboard SATA/IDE Device [Enabled]

Onboard SATA/IDE Ctrl Mode [IDE]

higf

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Item Help

Menu Level

