User`s manual

- 36 -
Load Optimized Defaults &
Press <Enter> on this item and select Yes to load the optimal BIOS default settings. The BIOS default
settings help the system to operate in optimum state. Always load the optimized defaults after updating
the BIOS or after clearing the CMOS values.
Boot Override &
Allows you to select a device to boot immediately. Press <Enter> on the device you select and select Yes
to conrm. Your system will restart automatically and boot from that device.
SaveProles &
This function allows you to save the current BIOS settings to a prole. You can create up to 4 proles and
save as Setup Prole 1~ Setup Prole 4.
LoadProles &
If your system becomes unstable and you have loaded the BIOS default settings, you can use this function
to load the BIOS settings from a prole created before, without the hassles of reconguring the BIOS
settings. First select the prole you wish to load and then press <Enter> to complete.
Chapter 3 Drivers Installation
Before installing the drivers, rst install the operating system. •
After installing the operating system, insert the motherboard driver disk into your optical drive. The •
driver Autorun screen is automatically displayed which looks like that shown in the screen shot
below. (If the driver Autorun screen does not appear automatically, go to My Computer, double-click
the optical drive and execute the Run.exe program.)
After inserting the driver disk, "Xpress Install" will automatically scan your system and then list all the drivers that
are recommended to install. You can click the Install All button and "Xpress Install" will install all the recommended
drivers. Or click Install Single Items to manually select the drivers you wish to install.