Owner's Manual

- 23 -
16) CLR_CMOS (Clear CMOS Jumper)
 UsethisjumpertocleartheCMOSvalues(e.g.dateinformationandBIOScongurations)andresetthe
CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch
the two pins for a few seconds.
Open: Normal
Short: Clear CMOS Values
• Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manuallyconguretheBIOSsettings(refertoChapter2,"BIOSSetup,"forBIOScongurations).
15) DEBUG PORT (Debug Card Header)
(Note)
This header can connect a debug card.
(Note) Whether this feature is supported depends on the product being received.
2
1
12
11
Pin No. Denition
1 No Pin
2 GND
3 VCC3
4 LAD0
5 LAD1
6 LAD2
7 LAD3
8 -LFRAME
9 -PFMRST
10 DB CLK
11 DB_P_SENSOR
12 NC
DEBUG
PORT
G.QBOFM