Datasheet

ManualsBrandsGigabyte ManualsMotherboardsGA-X48T-DQ6

GA-X48T-DQ6 Motherboard - 90 -

7. Save and Exit Setup: After configuring the RAID array, select the Save And Exit Setup item in the

main screen to save your settings before exiting the RAID BIOS utility, then press <Y> (Figure 10).

Figure 10

Figure 11

Delete the RAID Array:

To delete the array, select Delete RAID Disk Drive in the main menu and press <Enter>. The selection

bar will move to the RAID Disk Drive List block. Press the space bar on the array to be deleted; a

small triangle will appear to mark the selected array. Press <Delete>. When prompted to confirm your

selection (Figure 11), press <Y> to confirm or <N> to cancel.

Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA

RAID/AHCI driver and operating system.

GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOSv1.06.59

[ Main Menu ]

Create RAID Disk Drive

Delete RAID Disk Drive

Revert HDD to Non-RAID

Solve Mirror Conflict

Rebuild Mirror Drive

Save And Exit Setup

Exit Without Saving

[ RAID Disk Drive List ]

[KL]-Select RAID [SPACE]-Mark Delete [DEL]-Confirm [ESC]-Abort

[ Hard Disk Drive List ]

Model Name Capacity Type/Status

HDD0: ST3120026AS 120 GB RAID Inside

HDD1: ST3120026AS 120 GB RAID Inside

Model Name RAID Level Capacity Status Members(HDDx)

` RDD0: GRAID 0-Stripe 240 GB Normal 01

ALL DATA ON THE RAID WILL LOST!!

ARE YOU SURE TO DELETE (Y/N)? N