Datasheet

Appendix- 97 -
Figure 10
(Note) The item displayed in Figure 10 will be shown as Intel(R) ICH9 SATA AHCI Controller
when the SATA controllers are set to AHCI mode.
Step 3:
When a screen as shown in Figure 10 appears, select Intel(R) ICH8R/ICH9R SATA RAID Controller
(Note)
and press Next.
Step 4:
After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system
and then press Next to continue the OS installation (Figure 11).
Figure 11