Owner's Manual

Appendix - 80 -

The BIOS Setup menus described in this section may differ from the exact settings for your moth-

erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you

have and the BIOS version.

B. Conguring SATA controller mode in BIOS Setup

MakesuretoconguretheSATAcontrollermodecorrectlyinsystemBIOSSetup.

Step 1:

Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). To

create RAID, set ICH SATA Control Mode under the Integrated Peripherals menu to RAID(XHD) (Figure 1)

(IDE by default). If you do not want to create RAID, set this item to IDE or AHCI.

Step 2:

Save changes and exit BIOS Setup.

Figure 1

Integrated Peripherals

eXtreme Hard Drive (XHD) [Disabled]

ICH SATA Control Mode [RAID(XHD)]

SATA Port0-3 Native Mode [Disabled]

USB Controllers [Enabled]

USB Keyboard Function [Disabled]

USB Mouse Function [Disabled]

USB Storage Function [Enabled]

Azalia Codec [Auto]

Onboard H/W LAN [Enabled]

Green LAN [Disabled]



SMART LAN [Press Enter]

Onboard LAN Boot ROM [Disabled]

Onboard USB 3.0 Controller [Enabled]

higf

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Item Help

Menu Level

