User`s manual

- 117 - Appendix
For the Marvell 9128:
Turn off your computer and replace the failed hard drive with a new one. Please note to perform the rebuild,
you must enter the GSATA RAID Conguration menu in BIOS Setup.
Step 1:
After the system starts, enter the BIOS Setup program and go to Integrated Peripherals. Press <Enter> on
GSATA RAID CongurationtoaccesstheRAIDcongurationmenu.Movetheselectionbartothearrayto
be rebuilt (for example, VD 0: New_VD) and press <Enter> and then select Rebuild. Press <Enter> again.
Step 2:
The selection bar will move to the new drive. Press the <Space> key to select it and then press <Enter>.
Whenpromptedtoconrm,press<Y>tobegintherebuildor<N>tocancel.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Topology Information
Help
ID : 0
Name : New_VD
Status : Degrade
Stripe Size : 64K
RAID Mode : RAID1
Size : 75776MB
BGA Status : N/A
Number of PDs : 1
Numbers : 8
HBA 0 : Marvell 0
Virtual Disks
VD 0: New_VD
PD 8: WDC WD800JD-22L
Free Physical Disks
PD 0: WDC WD800JD-22L
Rebuilding with selected physical disk on this array.
ENTER: Operation F10: Exit/Save ESC: Return
[Delete]
[Rebuild]
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Topology Information
Help
ID : 0
Name : New_VD
Status : Degrade
Stripe Size : 64K
RAID Mode : RAID1
Size : 75776MB
BGA Status : N/A
Number of PDs : 1
Numbers : 8
HBA 0 : Marvell 0
Virtual Disks
VD 0: New_VD
PD 8: WDC WD800JD-22L
Free Physical Disks
* PD 0: WDC WD800JD-22L
Use space bar to select the free disks to be used in the array.
ENTER: Operation SPACE: Select F10: Exit/Save ESC: Return
Do you want to rebuild with selected physical disk on this vd?
Yes No
Rebuild