User`s manual

BIOS Setup - 56 -
eSATA Controller (JMicron JMB362 Chip, eSATA Connectors)
Enables or disables the SATA controller integrated in the JMicron JMB362 chip. (Default: Enabled)
eSATA Ctrl Mode (JMicron JMB362 Chip, eSATA Connectors)
 EnablesordisablesRAIDfortheSATAcontrollerintegratedintheJMicronJMB362chiporcongures
the SATA controller to AHCI mode.
IDE   DisablesRAIDfortheSATAcontrollerandcongurestheSATAcontrollertoIDE
mode. (Default)
AHCI   CongurestheSATAcontrollertoAHCImode.AdvancedHostControllerInterface
     (AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
Serial ATA features such as Native Command Queuing and hot plug.
RAID Enables RAID for the SATA controller.
GSATA 6_7/IDE Controller (Marvell 9128 Chip, GSATA3_6/7 Connectors)
Enables or disables the SATA controller integrated in the Marvell 9128 chip. (Default: Enabled)
GSATA 6_7/IDE Ctrl Mode (Marvell 9128 Chip, GSATA3_6/7 Connectors)
 AllowsyoutodecidewhethertoconguretheSATAcontrollerintegratedintheMarvell9128chipto
AHCI mode.
IDE   CongurestheSATAcontrollertoIDEmode.(Default)
AHCI   CongurestheSATAcontrollertoAHCImode.AdvancedHostControllerInterface
     (AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
Serial ATA features such as Native Command Queuing and hot plug.
SATA3 Firmware Selection
 DetermineswhethertoautomaticallyupdatethermwareoftheMarvell9128chip.
Onchip  Keepstheoriginalrmwareversion.(Default)
Auto   LetstheBIOSautomaticallyupdatethermwaretothelatestversion.
GSATA RAID Conguration (Marvell 9128 Chip, GSATA3_6/7 Connectors)
 AllowsyoutocongureRAIDfortheMarvell9128SATAcontroller.RefertoChapter5,"Conguring
SATAHardDrive(s),"forinstructionsonconguringaRAIDarray.
GSATA 8_9/IDE Controller (GIGABYTE SATA2 Chip, IDE and GSATA2_8/9 Connectors)
Enables or disables the IDE and SATA controller integrated in the GIGABYTE SATA2 chip. (Default: En-
abled)
GSATA 8_9/IDE Ctrl Mode (GIGABYTE SATA2 Chip, IDE and GSATA2_8/9 Connectors)
 EnablesordisablesRAIDfortheSATAcontrollerintegratedintheGIGABYTESATA2chiporcongures
the SATA controller to AHCI mode.
IDE   CongurestheSATAcontrollertoIDEmode.(Default)
AHCI   CongurestheSATAcontrollertoAHCImode.AdvancedHostControllerInterface
     (AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
Serial ATA features such as Native Command Queuing and hot plug.
RAID/IDE Enables RAID for the SATA controller; the IDE controller still operates in IDE mode.