User`s manual
- 20 -
Hardware Installation
1-6 Setting up AMD CrossFire
™
/NVIDIA
®
SLI
™
Conguration
A. System Requirements
- Windows 8.1/8/7 operating system
- A CrossFire/SLI-supported motherboard with two or more PCI Express x16 slots and correct driver
- CrossFire/SLI-ready graphics cards of identical brand and chip and correct driver
Current GPUs that support 3-Way/4-Way CrossFire technology include the ATI Radeon
™
HD
3800, HD 4800, HD 5800 series, and AMD Radeon
™
HD 6800, HD 6900, HD 7800, and HD
7900series. Forthe latestGPU support information, pleaserefer to theAMD officialwebsite.)
CrossFire
(Note1)
/SLI bridge connectors
- Apowersupplywithsufcientpowerisrecommended
(Note2)
(Refertothemanualofyourgraphicscards
forthepowerrequirement)
B. Connecting the Graphics Cards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install CrossFire/SLI graphics cards on the PCI
Expressx16slots.(Tosetupa2-Wayconguration,werecommendinstallingthegraphicscardsinthePCIEX16
andPCIEX8slots.Tosetupa3-Wayconguration,werecommendinstallingthegraphicscardsinthePCIEX16,
PCIEX8,andPCIEX4_1slots.)
Step 2:
Insert the CrossFire
(Note1)
/SLI bridge connectors in the CrossFire/SLI gold edge connectors on top of the cards.
Step 3:
Plug the display cable into the graphics card on the PCIEX16 slot.
C-2. To Enable SLI Function
After installing the graphics card driver in the operating system, go to
the NVIDIA Control Panel. Browse to the CongureSLI,Surround,
Physx screen and ensure Maximize 3D performance is enabled.
C.ConguringtheGraphicsCardDriver
C-1. To Enable CrossFire Function
After installing the graphics card driver in the operating system,
go to the Catalyst Control Center. Browse to Performance\
AMD CrossFireX
™
Conguration and ensure the Enable
CrossFireX
™
check box is selected. If your system have more
than two CrossFire cards, select the GPU combination you
wanttouseandclickApply.(Availablecombinationoptionsare
dependentonthenumberofgraphicscards.)